EasyManuals Logo

Junghans MAX BILL MEGA User Manual

Junghans MAX BILL MEGA
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
49 48
2.1 Functions of the button
Please use only the supplied correction pin to operate the corrector
button.
You can trigger the following functions by pressing the corrector
button:
Manual time synchronisation
If you are in the reception area of one of the ve time signal transmit-
ters, you can perform a manual time synchronisation at any time. To
do this, press the corrector button for more than 3 seconds in crown
position A. For more information on manual time synchronisation,
see chapter 8.
Sleep Mode
Sleep mode is an energy-ecient mode that extends battery life. If
you are not using the watch for a long time, it makes sense to activate
the sleep mode. To do this, press the corrector button for more than
9 seconds in crown position A. In sleep mode, the watch displays the
time at 10:08, 32 seconds and date 25. To reactivate the watch, press
the corrector button briey.
Reset function
If your Junghans MEGA does not show the correct time or date,
you can correct this with the reset function. Before you carry out a
reset, however, please check whether not only the time zone has
been changed (see chapter 7.2) or the watch is in quartz mode (see
chapter9).
Please ensure that there are no electronic sources of interference in
the vicinity of the watch.
Pull the crown into position C and press the corrector button for
longer than 16 seconds. The second hand will rst move backwards
briey, then forwards. The second, minute and hour hands then move
to the 12 o’clock position and the date rotates to “1”. Press the crown
back to position A. As soon as the positions are reached, the time
synchronisation starts for a maximum duration of 30 minutes. After
successful reception the watch adjusts automatically to the current
time. If reception was not successful, this is indicated by the second
hand jumping 5 seconds. Please synchronise the time manually again
in a location free of interference (press the corrector button for more
than 3 seconds). In regions without radio reception, set your Junghans
MEGA with the Junghans MEGA App (chapter 7.1) or in quartz mode
(chapter 9).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Junghans MAX BILL MEGA and is the answer not in the manual?

Junghans MAX BILL MEGA Specifications

General IconGeneral
BrandJunghans
ModelMAX BILL MEGA
CategoryWatch
LanguageEnglish

Related product manuals