Why Jungheinrich Forklifts engine oil indicator lit during operation?
The engine oil indicator might light up during operation because the engine oil level is too low. Check the engine oil level and top it up if needed.
What to do if my Jungheinrich Forklifts starter does not turn?
If the starter doesn't turn, here are some things to check: * The battery charge might be too low. Check the battery charge and charge the battery if necessary. * The battery terminal cable might be loose or the terminals oxidized. Clean and grease the terminals, then tighten the battery terminal cable. * The starter cable might be loose or broken. Check the starter cable and tighten or replace it as required. * The starter solenoid might be jammed. Check if the magnetic switch audibly engages.
Why Jungheinrich Forklifts overtemperature indicator lit?
If the overtemperature indicator is lit, it could be due to several reasons: * The engine oil level might be too low. Check the engine oil level and top it up if necessary. * The radiator might be contaminated. Clean the radiator. * The coolant level might be too low. Check the engine radiator system for leaks and add coolant if necessary. * The fan V belt might be slipping. Check the V belt tension and tighten or replace it as required.
Why Jungheinrich DFG 435s truck does not reach max. speed?
If the truck isn't reaching its maximum speed, it could be because the hydraulic reservoir oil level is too low. Check the hydraulic oil and top it up if necessary.
What to do if Jungheinrich Forklifts steering is sluggish?
If the steering feels sluggish, check the steering axle tire pressure and increase it to the correct pressure if necessary.
Why Jungheinrich DFG 435s lift speed too low?
If the lift speed is too low, consider these possible causes: * The hydraulic reservoir oil level might be too low. Check the hydraulic oil and top it up if necessary. * The hydraulic reservoir discharge system might be contaminated or blocked. Replace the hydraulic reservoir discharge system.
Why Jungheinrich DFG 435s Forklifts engine running but truck does not travel?
If the engine is running but the truck won't move, it could be due to: * The travel direction switch being in neutral. Set the travel direction switch to the desired direction. * The parking brake being applied. Release the parking brake.
What causes excessive steering play in Jungheinrich DFG 435s Forklifts?
Excessive steering play can be caused by air in the steering system. Check the hydraulic oil level, top up if necessary, and then turn the steering wheel several times from one end to the other.
Why Jungheinrich DFG 435s load cannot be raised to max. height?
If the load cannot be raised to the maximum height, the hydraulic reservoir oil level might be too low. Check the hydraulic oil and top it up if necessary.
General| Brand | Jungheinrich |
|---|---|
| Model | DFG 435s |
| Category | Forklifts |
| Language | English |
Covers proper truck usage, approved conditions, and general safety rules for operation.
Details proprietor duties and guidelines for adding attachments or optional equipment to the truck.
Provides a comprehensive description of truck models, functionality, and technical specifications like dimensions.
Explains identification points and data plates on the truck for reference and part ordering.
Outlines safety rules and procedures for refueling with diesel fuel and LPG, including container handling.
Details essential safety rules, driving best practices, and procedures for safe truck operation.
Explains the truck's control panel, operating controls, and how to adjust the operator's position for comfort.
Describes the functionality and operation of optional equipment such as the keypad and assistance systems.
Outlines crucial safety measures and regulations for performing maintenance and repair work on the truck.
Details step-by-step procedures for routine maintenance tasks on various truck systems.
Provides a schedule for safety tests, inspections, and maintenance intervals to ensure ongoing safe operation.
To Next Page