Jungheinrich EJC 110 Operating Instruction

Jungheinrich EJC 110

211 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

(-&



2SHUDWLQJLQVWUXFWLRQV

G





(-&

(-&

(-&

Other manuals for Jungheinrich EJC 110

Operating Instructions87 pages

Questions and Answers:

J
Jason MorrisAug 5, 2025
How to troubleshoot a Jungheinrich EJC 110 Lifting Systems truck that won't start?
- M
  Mark Brown MDAug 5, 2025
  If your Jungheinrich Lifting Systems truck won't start, there are several things to check: * Make sure the battery plug is securely connected. * Verify the key switch is in the 'I' position, not '0'. * Check the CANCODE code for accuracy. * Ensure the battery has sufficient charge and charge if needed. * Confirm the tiller is set to the travel range (F). * Inspect fuses F1 and F15 for any faults. * If using the on-board charger, disconnect it from the mains.
K
Kendra PorterAug 19, 2025
What to do if Jungheinrich EJC 110 Lifting Systems cannot lift the load?
- M
  michaeljohnstonSep 12, 2025
  If your Jungheinrich Lifting Systems is unable to lift a load, consider the following: 1. First, ensure the truck is operational by addressing any issues that might prevent it from starting. 2. Check the hydraulic oil level and replenish if low. 3. Inspect fuse F15 for any faults. 4. Verify that the load does not exceed the maximum capacity specified on the data plate. 5. Ensure the battery has sufficient charge (above 20/40%); if not, charge the battery.

Jungheinrich EJC 110 Specifications

General

Load Capacity	1000 kg
Overall Width	800 mm
Battery Voltage	24 V
Drive	Electric
Travel Speed	6 km/h

Related product manuals

Jungheinrich EJC 112

Jungheinrich EJC 212

Jungheinrich EJC 212-220