To Next Page
S
Susan WalshAug 2, 2025
What to do if my Jungheinrich EJC 212-220 truck does not start?
- SsolisjamieAug 2, 2025
If your Jungheinrich Lifting Systems truck won't start, there are several potential causes: * The battery plug might not be connected, so check the battery connector and connect it if necessary. * The key switch may be in the "0" position; set it to "I". * There might be an incorrect CANCODE code, so check the code. * The battery charge could be too low; check the charge and charge the battery if needed. * The tiller might not be set to the travel range (F); set it accordingly. * A fuse may be faulty; check fuses F1 and F15. * The on-board charger might be connected; disconnect it from the mains.
General
