Jungheinrich EJC 212-220 - Maintenance Checklist

0307.GB
F 4
4 Maintenance Checklist
Maintenance intervals
Standard = t WA BC
Cold store= k
Brakes 1.1 Check effectiveness of operating and parking brakes,
adjust where necessary and measure braking distance.
kt
1.2 Check the brake lining wear k
Electrics 2.1 Test operation of instruments, displays and control
switches
t
2.2 Test warning and safety device kt
2.3 Check fuse ratings t
2.4 Make sure wire connections are secure and check for
damage
t
2.5 Test micro switch setting t
2.6 Check contactors and relays t
2.7 Test safety switch t
2.8 Test cable and motor attachments t
2.9 Check carbon brush wear, replace if necessary t
Energy
supply
4.1 Battery visual inspection kt
4.2 Check battery connections are secure, grease terminals
if necessary.
kt
4.3 Check acid density, acid level and battery voltage kt
Travel 5.1 Check transmission for noise and leakage t
5.2 Test travel mechanisms, adjust and lubricate if
necessary, carry out tiller recuperation test.
kt
5.3 Check wheels for wear and damage kt
5.4 Check wheel suspension and attachments kt
Truck
structure
6.1 Check mast attachment t
6.2 Check chassis for damage. t
6.3 Check labels t
0307.GB
F 4
4 Maintenance Checklist
Maintenance intervals
Standard = t WA BC
Cold store= k
Brakes 1.1 Check effectiveness of operating and parking brakes,
adjust where necessary and measure braking distance.
kt
1.2 Check the brake lining wear k
Electrics 2.1 Test operation of instruments, displays and control
switches
t
2.2 Test warning and safety device kt
2.3 Check fuse ratings t
2.4 Make sure wire connections are secure and check for
damage
t
2.5 Test micro switch setting t
2.6 Check contactors and relays t
2.7 Test safety switch t
2.8 Test cable and motor attachments t
2.9 Check carbon brush wear, replace if necessary t
Energy
supply
4.1 Battery visual inspection kt
4.2 Check battery connections are secure, grease terminals
if necessary.
kt
4.3 Check acid density, acid level and battery voltage kt
Travel 5.1 Check transmission for noise and leakage t
5.2 Test travel mechanisms, adjust and lubricate if
necessary, carry out tiller recuperation test.
kt
5.3 Check wheels for wear and damage kt
5.4 Check wheel suspension and attachments kt
Truck
structure
6.1 Check mast attachment t
6.2 Check chassis for damage. t
6.3 Check labels t