0606.GB
C 4
4 Operating the truck without its own drive system
F
This operating mode is not permitted when negotiating inclines and gradients.
To operate the truck in emergency conditions, the electromagnetically applied brake
must be released.
– Remove the front panel (see Chapter F).
– Raise the anchor plate by screwing two off M4x20 screws in as far as the stop.
– The truck can now be moved.
M
Remove the screws again when you have parked the truck. Braking is now restored
again.
0606.GB
C 4
4 Operating the truck without its own drive system
F
This operating mode is not permitted when negotiating inclines and gradients.
To operate the truck in emergency conditions, the electromagnetically applied brake
must be released.
– Remove the front panel (see Chapter F).
– Raise the anchor plate by screwing two off M4x20 screws in as far as the stop.
– The truck can now be moved.
M
Remove the screws again when you have parked the truck. Braking is now restored
again.
To Next Page
Loading...
