D 3
0606.GB
4 Charging the battery
The EJC 212-220 is fitted as standard with an onboard charger (for charging: see
section 4.1).
The EJC 212-220 can be optionally fitted with a stationary charger
(for charging: see section 4.2).
M
To charge the battery, the truck must be dry and parked in closed and properly
ventilated rooms.
4.1 Charging the battery with an on-board charger (o)
The charger must not be opened. If damaged, it must be replaced.
Z
The switch (3) of trucks supplied without a battery is factory-set to the “0” position.
The red LED (4) flashes to indicate the battery cannot be charged.
3
4
D 3
0606.GB
4 Charging the battery
The EJC 212-220 is fitted as standard with an onboard charger (for charging: see
section 4.1).
The EJC 212-220 can be optionally fitted with a stationary charger
(for charging: see section 4.2).
M
To charge the battery, the truck must be dry and parked in closed and properly
ventilated rooms.
4.1 Charging the battery with an on-board charger (o)
The charger must not be opened. If damaged, it must be replaced.
Z
The switch (3) of trucks supplied without a battery is factory-set to the “0” position.
The red LED (4) flashes to indicate the battery cannot be charged.
3
4
To Next Page
Loading...
