To Next Page
B
Brittany WebbAug 7, 2025
What to do if Jungheinrich EZS 330 does not move?
- EEric HaasAug 7, 2025
If the Jungheinrich Floor Machine doesn't move, several issues could be the cause. First, check if the battery connector is properly connected. If not, connect it. Next, ensure the isolator (Emergency Stop) is not depressed; release it if it is. Also, verify that the key switch is set to position “I”. If the battery charge is too low, recharge the battery. Finally, check fuses F1 and 1F1 for any faults.
General
