I1
0709.GB
Table of contents
A Correct use and
application 1
B Description of battery
charger 2
1 Technical description 2
2 Charging electronics 4
3 Protection / Ambient conditions 4
4 Identification label, 4
C Transportation and
Commissioning 5
1 Transporting the charger 5
2 Charger Assembly 5
3 Starting up the charger 5
D Battery - Servicing,
recharging, replacement 6
1 Safety regulations governing
the handling of lead-acid
batteries 6
E Operation 7
1 Safety regulations relating to
the operation of battery chargers 7
2 Description of the operating
controls and indicating elements 8
3 Commissioning the battery
charger 9
3.1 Connecting the charger 9
3.2 Starting the charging operation 9
3.3 Battery charging sequence 9
3.4 Mains supply 9
3.5 Fault indication (safety cut-out) 9
3.6 Manual charging interruption 10
3.7 Boosting charge 10
3.8 Manual Compensation Charge 10
3.9 Automatic equilising charge
function 10
4 Charging state indicator 10
F Charger Maintenance 11
1 Operational safety and
environmental protection 11
2 Safety instructions to
be observed during servicing 11
3 Cleaning operations 11
4 Working on the SLT 100
charger 11
5 Fuses 11
5.1 Small battery charger 11
5.2 Large battery charger 12
G Internal electrolyte stirrer
(EUW) 13
1 Correct use and application 13
2 Charger Assembly 13
3 Electrolyte circulation (EUW) 13
4 Description of the device 13
5 Commissioning 15
5.1 Air volume flow presetting 15
6 Maintenance of the filter 15
7 Aid for malfunctions 16
7.1 Malfunction: Pump does not
react during charging. 16
7.2 Malfunction: Charging time is
not reduced 16
7.3 Malfunction: Loud pump noises 16
H “LIS” charge information
system (
o) 17
I Sample data plate 18
To Next Page
Loading...
