169
11.14 EN
4.6.2 Lowering the Cab
Z The cab cannot be lowered electrically.
Procedure
• To lower the cab, use the lever (240) to
release the locking device (210) and
lower the cab.
•
• To lower the cab, insert the long side of
the pump rod (239) through the infeed
(238) onto the hexagon of the lowering
valve and carefully turn the lowering valve
anti-clockwise to open it.
DANGER!
No persons are permitted in the area
around the cab while it is being
lowered.
Z After the cab is lowered, return the muffler
to the vertical position.
To Next Page
Loading...
Need help?
General
