Jungheinrich TFG 680 User Manual

69
11.14 EN
2.5.2 Warning indicators
Symbol Display Function
Hydraulic oil
o
Hydraulic oil level too low.
Transmission
flashing
t
Transmission oil temperature too low
Stop the truck immediately.
Engine oil flashing
with "Stop"
t
Engine oil pressure too low
Engine cuts out.
Exhaust gas
pressure
t
Exhaust pressure too high
Clean particle filter
Brake pressure
t
No brake pressure present
Air filter
t
Clean air filter
Main control unit
t
Error in the main control unit (CVC)
Transmission t Error in the transmission controller
Hydraulic oil flashing o Hydraulic oil temperature too low
(below +5° C)
Hydraulic oil temperature too high
(above +85° C)
Stop the truck immediately
Engine t Engine error
Pilot valve t Pilot valve error
Preheat display t Engine preheated
“Stop“ t Engine is switched off automatically
Intake temperature
flashing
t Air filter must be cleaned immediately
Park the truck immediately
Multi-Pilot t Multi-Pilot has an error
Engine temperature
flashing
with "Stop"
t Engine temperature too high
Engine cuts out.
t = Standard equipment o = Optional equipment

Jungheinrich TFG 680 Specifications

General

Brand	Jungheinrich
Model	TFG 680
Category	Front End Loaders
Language	English