Chapter 2 Standard Features 23
Bluetooth
®
Wireless Communication
The Mesa 2 has built-in Bluetooth
®
wireless technology,
allowing you to connect it to other wireless devices with
Bluetooth technology.
Creating a Partnership/Pairing a Bluetooth Device
To create a partnership between the Mesa 2 and another
device with Bluetooth technology:
1. Turn both devices on.
2. Place them within a few feet of each other. (The Mesa
has long range Bluetooth, but the other device might
not.)
3. Make Bluetooth discoverable on both devices. Bluetooth
on the Mesa 2 is off by default. To activate it, open the
Action Center and press and hold the Bluetooth icon.
Select Go to settings.
4. In the Bluetooth settings screen, you should see a list of
all Bluetooth devices within range. Tap on the name of
the device in the list you would like to pair with, then
tap Pair. If prompted, enter the PIN or pass code of
the paired device. You should now be paired with the
device.
Note: If Bluetooth is on and the tablet enters sleep or
hibernate mode, Bluetooth turns off to save battery power.
The connection is resumed once it powers back on.
Wi-Fi Wireless Networking
The Mesa 2 has built-in Wi-Fi wireless networking to connect
to the internet or an ofce network.
Connecting to a Wi-Fi Network
To use Wi-Fi, you need to be in range of a Wi-Fi access
point to make a connection. When Wi-Fi is turned on (the
default), the Mesa 2 automatically starts scanning the area
for available Wi-Fi networks.
From the Action Center, click and hold the Wi-Fi network
icon, then select go to settings. A list of available networks
is shown. Select the network you want to use and enter
To Next Page
Loading...
