Appendix C Warnings, Regulatory Information, Licensing 61
Improper battery use may result in a re, explosion or other
hazard.
Excell Battery Company Charge Instructions
2EXL7492 Internal Battery: 3A Constant Current to 4.2V,
4.2V Contant Voltage to termination current of 50mA
2EXL7493 Removable Battery: 6A Constant Current to
4.2V, 4.2V Constant Voltage to termination current of
100mA
Wall Charger Warnings
WARNING! To reduce the risk of personal injury, electrical
shock, re or damage to the equipment:
Plug the wall charger into an electrical outlet that is easily
accessible at all times.
Do not place anything on the wall charger cord or any
of the other cables. Arrange them so that no one may
accidentally step on or trip over them.
Do not pull on a cord or cable. When unplugging the wall
charger from the electrical outlet, pull on the plug, not the
cord.
The AC wall charger must be approved by Juniper Systems,
have an output rating of 12 VDC and a minimum 1.67 A,
and be certied or listed by a nationally recognized testing
laboratory. The AC wall charger provided with the Mesa 2
meets these criteria. Using any other external power source
can damage your product and void your warranty.
!
To Next Page
Loading...
