EasyManua.ls Logo

Juniper Mesa 3 - Battery Charger

Juniper Mesa 3
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 Optional Features and Accessories 43
Battery Charger
The Battery Charger is an optional accessory, allowing you
to charge spare battery packs for the Mesa 3.
How to Use the Battery Charger
Batteries charge best at room temperature (about 68°F or
20°C). Batteries will not charge (or might charge slowly) at
temperatures below 32°F (0°C) or above 122°F (50°C).
Power the Battery Charger by using the AC wall charger
provided with your Mesa 3. Slide the battery pack into the
battery charger, orienting it so that the battery contacts
meet the charging contacts in the battery charger. The
red LED ashes slowly, indicating that the battery pack is
charging.
LED Indicator
The LED indicates the charging status:
Solid, on: The battery pack is fully charged.
Blinking (slow): The battery pack is charging.
Off: There is no power. The battery is not charging.

Other manuals for Juniper Mesa 3

Related product manuals