Mesa Barcode Scanner Owner’s Manual 31
European Union (CE Marking)
Products bearing the CE marking comply
with the 2004/108/EC (EMC Directive),
2006/95/EC (Low Voltage Directive) issued by the
Commission of the European Community.
CE compliance of this device is valid only if
powered with/by a CE-marked wall charger
provided by the manufacturer. Cables
connecting to the USB host port must use a ferrite
core/bead on the cable. The ferrite core must be
placed on the cable near the end that connects
to the Mesa. Compliance with these directives
implies conformity to the following standards:
EN 55022 (CISPR 22) Electromagnetic
Interference
EN 55024 (IEC 61000-4-2, 3, 4, 5, 6, 8, 11)
Electromagnetic Immunity
EN 60950 (IEC 60950) Product Safety
To Next Page
Loading...
