Name: Juniper MX80
Brand: Juniper
Rating: 5 (1 reviews)

To Next Page

MX5, MX10, MX40, and MX80

3D Universal Edge Router

Quick Start

January 2015

Part Number: 530-062012

Revision 01

This document describes how to install the Juniper Networks

MX5, MX10, MX40, and

MX80 3D Universal Edge Router.

Contents

MX5, MX10, MX40, and MX80 Quick Start Description . . . . . . . . . . . . . . . . . . . . . . 3

Step 1: Prepare the Site for MX5, MX10, MX40, or MX80 Installation . . . . . . . . . . . 4

MX5, MX10, MX40, and MX80 Router Rack Requirements . . . . . . . . . . . . . . . . 4

Tools Required to Prepare the MX5, MX10, MX40, and MX80 Router for

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Move the Mounting Brackets for Center-Mounting the MX5, MX10, MX40,

or MX80 Router, If Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Step 2: Install the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Tools Required to Install the MX5, MX10, MX40, or MX80 Router . . . . . . . . . . 7

Install the MX5, MX10, MX40, or MX80 Chassis in the Rack . . . . . . . . . . . . . . . 7

Install the MX5, MX10, MX40, or MX80 Cable Management Bracket . . . . . . . 8

Step 3: Connect the Grounding Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Step 4: Connect External Devices and Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connect the MX5, MX10, MX40, or MX80 Router to a Network for

Out-of-Band Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connect the MX5, MX10, MX40, or MX80 Router to a Management Console

or Auxiliary Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connect MIC Cables to the MX5, MX10, MX40, or MX80 Router . . . . . . . . . . . 11

Step 5: Connect Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connect Power to an AC Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connect Power to a DC Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Step 6: Perform Initial Software Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Enter Configuration Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Configure User Accounts and Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Configure System Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Juniper MX80 User Manual

Other manuals for Juniper MX80