Need help?Do you have a question about the Juniper MX204 and is the answer not in the manual?
General| Cooling type | Active |
|---|---|
| Product color | Gray |
| Rack capacity | 1U |
| Rack mounting | Yes |
| Number of fans | 3 fan(s) |
| AC input voltage | 100 - 240 V |
| Number of power supply units | 2 |
| Operating altitude | 0 - 1828 m |
| Operating temperature (T-T) | 0 - 55 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
Weight and Dimensions| Depth | 475 mm |
|---|---|
| Width | 447 mm |
| Height | 44.5 mm |
| Weight | 10500 g |
Guidelines for selecting and preparing a rack, including type and hole spacing, for MX204 router installation.
Ensuring adequate airflow and space for maintenance around the router chassis for proper cooling.
Details on the router's front-to-back cooling system and airflow requirements for optimal performance.
List of necessary tools and components for preparing the MX204 router installation site.
Connecting the router to a network for remote management via the MGMT port.
Connecting a laptop or console terminal to the CON port for router configuration.
Connecting 1-PPS, 10-MHz timing, Time-of-Day, and BITS devices for synchronization.
Procedure for connecting the MX204 router to an AC power source, including voltage specifications.
Procedure for connecting the MX204 router to a DC power source, including voltage specifications.
Steps to access the router's CLI and enter configuration mode for software setup.
Setting up user accounts, including root authentication and management console access.
Configuring essential system settings like hostname, domain name, IP addresses, and DNS.
Verifying and applying configuration changes to the router.
Key warnings and cautions for safe installation, operation, and component handling of the router.
To Next Page
