JUNO J6SLC RGBW MW User Manual

INSTALLATION INSTRUCTIONS
Juno Smart LED RGBW Speaker LED Trim Kit
912-00386-001 REV F
DATE 10/2023
PAGE | 5
Step 2: DETERMINE WIRING METHOD (SELECT ONE WIRING METHOD)
A. E26 Socket Adapter:
1. Screw adapter into the base socket inside housing. (Figure 1)
2. Plug orange connector of adapter into the fixture’s mating orange connector.
B. LED Connector:
1. Plug orange connector from the fixture into the mating LED connector inside
housing. (Figure 2)
Step 3: INSTALL UNIT(S) INTO RECESSED HOUSING(S)
3.1 Squeeze legs of each torsion spring together and seat them inside the torsion
brackets of the Housing. Release springs, and gently push module into housing until
flush with ceiling. (Figure 3)
3.2 Repeat this step for each additional unit.
Note: Wall dimmer switches are not compatible with the speaker light. Do not use a wall dimmer switch to
control the power cycling of the fixture. Dimming is controlled through the smart app.
Figure 1
Figure 2
Figure 3
One Lithonia Way · Conyers, GA 30012 · Phone 1-(800)705-7378
Visit us at www.acuitybrands.com/juno-recessed
© 2023 Acuity Brands Lighting, Inc.

JUNO J6SLC RGBW MW Specifications

General

Brand	JUNO
Model	J6SLC RGBW MW
Category	Speakers
Language	English