INSTALLATION INSTRUCTIONS
Juno Smart LED RGBW Speaker LED Trim Kit
912-00386-001 REV F
DATE 10/2023
PAGE | 7
B. SmartThings Hub
i. Using an iOS or Android phone, add Speaker Light with SmartThings app.
ii. Click “+” then “Scan for New Devices”, as seen in Figure 5. Follow the prompts to
connect each fixture. If fixture is not shown in app, try restarting the app and turning the
light on and off at the switch.
Note: Using SmartThings Hub offers more Smart Home Connectivity than D2D. On\off, dim, CCT, RGB, remote connectivity,
group control, scenes and schedules functionalities are available to user. Alexa and Google Home can be linked for voice control
C. Google Home Direct Connection
i. This requires the use of a Google Home Speaker with Zigbee.
ii. For set-up, select “set up device”, then “New Devices”.
Note: Google is limited to only four smart home devices per Google Home device. For more devices, use an Alexa home hub or
SmartThings hub.
Note: Voice and App control, On\off, dim, CCT, RGB, remote connectivity, group control, Routines and Automations
functionalities are available to user.
D. Alexa Direct Connection
i. This requires the use of an Alexa unit with Smart Home Hub (Echo 4th Gen., Echo plus,
Echo Studio, Echo Show 10).
ii. For set-up, Ask Alexa: “Alexa, discover my devices”.
Note: Voice and App control, On\off, dim, CCT, RGB, remote connectivity, group control, Routine and Automation functionalities
are available to user.
4.4 Repeat steps 4.1-4.3 for each device installed.
Note: Steps 4.1-4.4 is required if the user wants to create a speaker group or alter light output of the fixture. If the user prefers to
keep the fixture at 3000K at max brightness and only utilize speaker control for the singular fixture, Steps 4 and 5 may be
skipped. For full functionality of the fixture, continue with the installation process.
Note: The fixture can only be connected to a Smart product platform one unit at a time. If the user would like to switch from one
platform to another, a factory reset must be completed for each unit and then reconnected to the new Smart platform. Find how to
factory reset the fixture in the Troubleshooting Guide.
One Lithonia Way · Conyers, GA 30012 · Phone 1-(800)705-7378
Visit us at www.acuitybrands.com/juno-recessed
© 2023 Acuity Brands Lighting, Inc.
To Next Page
Loading...
General