EasyManuals Logo

JUNO J6SLC RGBW MW User Manual

JUNO J6SLC RGBW MW
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
INSTALLATION INSTRUCTIONS
Juno Smart LED RGBW Speaker LED Trim Kit
912-00386-001 REV F
DATE 10/2023
PAGE | 8
Step 5: SET UP SPEAKER GROUPING
For this section, either watch the video by scanning the QR Code below or read the step-by-step
instructions in this guide.
Note: Every fixture installed can be set as a “MASTER” unit or “SATELLITE” unit. For each speaker group, only one fixture can
be the “MASTER” unit, and the rest will be “SATELLITE” units.
Note: Step 5 is only required if multiple units will be paired together for audio control. If the user would like to play audio from a
singular fixture, this section can be skipped.
Note: Step 5 can be completed using the SmartThings smartphone app or any hub such as Amazon Alexa, Samsung SmartThings
Hub, or Google Home.
Note: Ensure that all of the devices are connected to your smart device or hub of choice BEFORE speaker grouping. The only
way to move a speaker group to another Smart Platform is through a factory reset and setting up all the speaker lights for
grouping, again
5.1 Determine which fixture in the speaker group is optimal to be selected as the MASTER unit. The
remaining units in the speaker group will be SATELLITE” units.
Note: The fixture selected to be the “MASTERshould be the unit most centrally located in perspective to all other fixtures in the
desired speaker group. The “MASTER” unit is the fixture that connects to the smart device for casting audio and controls the rest
of the speaker group.
Note: If a “SATELLITE” unit is over 30 ft away from the “MASTER” unit, audio may sound distorted.
Note: If the smart device for audio control is over 30 ft from the “MASTER” unit, the entire speaker group’s audio may sound
distorted.
5.2 To initiate speaker grouping mode, turn the light “On” and “Off” five times in your smart product app
(Amazon Alexa, Google Home, Smart Things). This
CANNOT
be done at the light switch. The device
will factory reset if power cycled at the light switch and each device will need to be reconnected to the
Smart platform chosen.
One Lithonia Way · Conyers, GA 30012 · Phone 1-(800)705-7378
Visit us at www.acuitybrands.com/juno-recessed
© 2023 Acuity Brands Lighting, Inc.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JUNO J6SLC RGBW MW and is the answer not in the manual?

JUNO J6SLC RGBW MW Specifications

General IconGeneral
BrandJUNO
ModelJ6SLC RGBW MW
CategorySpeakers
LanguageEnglish