OPERATOR’S MANUAL
7
2. SAFETY SECTION
Pay special attention to the sections which are identified with
Safety Alert Symbol. Follow the instructions in the safety
message.
DANGER!
DANGER indicates a potentially dangerous
situation which, if not avoided, will result to a
serious personal injury or death.
WARNING!
WARNING indicates a potentially dangerous
situation which, if not avoided, could result to a
serious personal injury or death.
CAUTION!
CAUTION indicates a potentially dangerous
situation which, if not avoided, could result to a
less serious injury or material damage.
NOTICE!
NOTICE sign is used to draw your attention to
situations which, if not avoided, could result to
material damages or the malfunctioning of the
machine.
• You should read and understand all the safety instructions and
operating instructions before you start using, maintaining, lubricating
or repairing the hammer.
• Accidents can be caused by ignorance of instructions, neglect of safety
measures and carelessness.
• Incorrect use, lubrication or repair can be dangerous and lead to
physical injury or damage to the hammer.
• The instructions in these manuals, specifications, illustrations and
drawings are based on the information available at the time of writing.
Information can be changed. These changes may affect the use,
lubrication, service and repair procedures.
• Junttan or its dealer will provide you with up-to-date information
regarding the operation and maintenance of this hammer.
• If the operator’s manual is missing or worn out you can get a new one
from the Junttan or its dealer.
• The hydraulic oil is pressurised during operation. Prior to
disconnecting any parts from the hydraulic system make sure that you
relieve the pressure.
• When connecting hammer to piling machine check stability of the
machine before start piling.
• Keep a minimum distance of 3 metres from any power lines and in the
case of high voltage lines find out the proper safe working distance.
• Do not stand on any mobile parts of the hammer during operation.