Jura 751 - Dismantling and Rinsing the Dual Spout

35
5 Maintenance
T Press the ‘Start’ button.
‘Milk system is being cleaned’, the dual spout and the milk
pipe are cleaned. Water flows out of the dual spout.
The operation stops automatically. Your Z6 is once more
ready for use.
The dual spout must be dismantled and rinsed daily if milk has been
prepared to make sure it functions perfectly and also in the interests
of hygiene.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Press the releasing devices and pull the cover of the dual
spout up and off.
T Remove the milk system from the dual spout.
T Dismantle the milk system into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 250ml cold water and 1 capful of JURA milk
system cleaner. Then rinse the parts thoroughly.
Dismantling and rinsing
the dual spout