What to do if Jura 765 doesn't produce enough milk foam?
If your Jura Coffee Maker isn't producing enough foam or milk sprays out of the fine foam frother, the frother might be dirty. Clean the fine foam frother. You may need to dismantle and rinse it.
What to do if Jura 765 Coffee Maker says ‘Not enough ground coffee’?
If your Jura Coffee Maker displays ‘Not enough ground coffee’, it means there is insufficient ground coffee in the machine. Add more ground coffee the next time you prepare a beverage.
What to do if my Jura 765 displays ‘Error 2’ or ‘Error 5’?
If your Jura Coffee Maker displays ‘Error 2’ or ‘Error 5’, it might be because the machine has been exposed to the cold for an extended period, which can disable heating for safety. To resolve this, warm the machine at room temperature.
How to fix insufficient foam on my Jura 765?
If your Jura Coffee Maker is not producing enough foam or milk sprays out of the frother, it could be that the professional fine foam frother is dirty. Clean the frother. Another solution is to dismantle and rinse the professional fine foam frother.
What to do if my Jura 765 says ‘Empty coffee grounds container’ / ‘Empty drip tray’?
If your Jura Coffee Maker displays 'Empty coffee grounds container' or 'Empty drip tray', it means that either the coffee grounds container or the drip tray is full. As a result, you won't be able to prepare any products until you address this. Empty both the coffee grounds container and the drip tray to resolve the issue.
Why is there ground coffee behind the container in my Jura 765?
If you find dry ground coffee behind the coffee grounds container of your Jura Coffee Maker, it indicates that the beans you're using are producing an above-average volume of ground coffee. To address this, reduce the coffee strength or choose a finer grinder setting.
What to do if my Jura 765 won't recognize the water tank?
If your Jura Coffee Maker displays ‘Fill water tank’ even when the tank is full, it's likely due to limescale buildup in the water tank. Descale the water tank to resolve this issue.
Why does coffee only come out in drips from my Jura Coffee Maker?
If coffee only comes out in drips when you're preparing it with your Jura Coffee Maker, it could be due to a couple of reasons. First, the coffee might be ground too finely, obstructing the system; try setting the grinder to a coarser setting or using coarser ground coffee. Second, the water hardness may not have been correctly set; in this case, perform descaling.
What to do if my Jura 765 says 'Drip tray not fitted'?
If your Jura Coffee Maker displays 'Drip tray not fitted', it means the drip tray is either not inserted correctly or not inserted at all. Make sure to fit the drip tray properly.
Why Jura 765 Coffee Maker doesn't show 'Fill water tank' when empty?
If your Jura Coffee Maker's water tank is empty, but the 'Fill water tank' message isn't displayed, it could be due to limescale buildup in the water tank. Descale the water tank to resolve this issue.
General| Weight | 10.5 kg |
|---|---|
| Pump Pressure | 15 bar |
| Power Consumption | 1450 W |
| Coffee Types | Coffee |
| Dimensions | 280 x 340 x 420 mm |
| Dimensions (W x D x H) | 280 x 340 x 420 mm |
To Next Page
