Jura Cool Control 0.6 l - Calibrating the milk level display; Preparing the stainless steel container; Cooling milk

16
Cool Control 0.6 l
T Connect the mains cable to the Cool
Control.
T Insert the mains plug into a power socket.
Calibrating the milk level display
The milk level is calculated based on weight. For
this reason, you must calibrate the built-in scales.
T Remove the stainless steel container with its
cover from the Cool Control.
T Open the machine cover.
T Press the On/Off button Q to switch on the
Cool Control.
T Press the calibration button for about
3 seconds.
An acoustic signal sound. Calibration is now
complete.
Preparing the stainless steel container
T Insert the metal tube into the adapter.
T Position the adapter on the edge of the
stainless steel container.
2 Cooling milk
T Insert the stainless steel container into the
Cool Control.
T Fill the stainless steel container with cold
milk.
T Use the cover to close the stainless steel
container.
T Connect the milk pipe of the coffee machine
to the adapter.
E To connect the milk pipe to the adapter
correctly, the pipe must be fitted with a
connector.
T Open the machine cover.
T Press the On/Off button Q to switch on the
Cool Control.
E To save energy, the cooling process stops as
soon as the stainless steel container is
removed from the Cool Control.
E To switch off the Cool Control, press the On/
Off button Q.
E If you want to shut down the machine,
remove the mains plug from the power
socket.