7
F9 – Quick Reference Guide
T Press the ‘Change the filter’ button.
‘Change the filter’
T Press the ‘Start’ button.
T Press the ‘Start’ button again.
‘Change filter’
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge.
T Inser t a new CLARIS filter cartridge Blue into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle under the hot-water spout.
T Press the ‘Next’ button.
‘Switch open’
l T Turn the switch to the m position.
‘Filter is being rinsed’, water flows out of the hot-water
spout.
E You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
300 ml. ‘Switch close’ appears on the display.
y T Turn the switch to the ° position.
‘Please select product’ appears on the display.
To Next Page
Loading...
Need help?
General
