Sensor-Touch Display
Right
Control Buttons
Hot
Water Steam
Left Control Buttons
RINSE
2 Cup
Ground
Coffee
ON/OFF
1 Cup
PROGRAM
SELECT PRODUCT
ST@RT
Big Cup Coffee Espresso Mild Normal Strong
Impressa F9 Quick Reference Guide
This Guide does not replace the Operating Instructions.
For details and cautions you must
read all instructions.
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with beans.
Despite cleaning, traces of ground coffee may be found.
GREEN TEXT represents information in the display.
A) First Time Ever Preparation
1. Fill water in tank and beans in bean container.
2. DO NOT install the Claris Filter Cartridge now!
3. Push
ON/OFF button. When the display reads FILL
SYSTEM / WATER PORTION place a cup underneath
the frother and push the HOT WATER button. When the
F9 stops pumping: YOUR MACHINE IS HEATING.
4. Then
PRESS MAINT. Place a cup under the coffee
spouts and press the
RINSE button. Display reads SELECT
PRODUCT and the complete touch screen is illuminated.
5. Place a cup underneath the coffee spout, touch the
ESPRESSO symbol, then touch the 3-BEAN symbol,
ESPRESSO STRONG. Touch and hold the ST@RT symbol
until machine starts grinding. Repeat once. Discard the
first two cups of coffee.
B) Daily Preparation
•
Fill fr
esh water in tank and check bean container
.
• Push
ON/OFF button. HELLO YOUR MACHINE IS HEAT-
ING. PRESS MAINT. Place a cup under the coffee spout
and press the
RINSE button. SELECT PRODUCT.