Do you have a question about the Jura Impressa F50 and is the answer not in the manual?
Type | Coffee |
---|---|
Dimensions (WxDxH) | 280 x 345 x 435 mm |
Cup warmer | Yes |
Product type | Espresso machine |
Capacity in cups | 16 cups |
Water tank capacity | 1.9 L |
Maximum operating pressure | 15 bar |
Lid type | Hinged lid |
Product color | Black, Silver |
Multi beverage | No |
Weight | 9100 g |
---|
Critical safety warnings to prevent injury or damage during machine use.
Important precautions to ensure safe operation and prevent machine damage.
Verifying the machine's voltage compatibility with the local power supply.
Ensuring the electrical fuse has sufficient capacity for the machine.
Instructions on how to properly fill the water tank with fresh, cold water.
Guidance on filling the bean tank and precautions for coffee bean types.
How to adjust the coffee bean grinding fineness for optimal coffee.
Step-by-step guide for installing a new Claris filter cartridge.
Instructions on when and how to replace the Claris filter cartridge.
Steps to connect the optional Profi-Auto-Cappuccino accessory.
How to prepare cappuccino and froth milk using the accessory.
Instructions for daily cleaning of the Profi-Auto-Cappuccino accessory.
Setting the filter status in the machine's programming menu.
Adjusting the water hardness setting for optimal machine performance.
Selecting between INTENSIVE and STANDARD aroma settings.
Adjusting the brewing temperature to HIGH or NORMAL.
Setting the current time, required for automatic functions.
Setting the time for the machine to automatically switch on.
Setting a timer for the machine to automatically switch off.
Checking the number of coffee cups drawn off for different types.
Selecting the display language for the machine's interface.
Instructions for refilling the water tank when prompted.
Procedure for emptying the coffee grounds container when full.
Action to take if the drip tray is not installed correctly.
Guidance on refilling the bean tank and cleaning it.
Instructions for replacing the filter cartridge when it's used up.
Performing the automatic cleaning program for the machine.
Notification that de-scaling is required due to calcification.
General advice on cleaning the machine's exterior and components.
Procedure to empty the machine's system for frost protection.