23
3 Daily operation
3 Daily operation
When the GIGA is switched on, a rinse operation is automatically ini-
tiated. In programming mode you can change this setting so that
the machine prompts you to perform the switch-on rinse by press-
ing the Rotary Switch k (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Maintenance settings’).
Precondition:Your GIGA is switched on at the power switch.
T Place a receptacle under the dual spout.
Q T Press the On/Off button to switch the GIGA on.
‘Welcome to JURA’ appears on the display. The machine
heats up.
‘Machine is rinsing.’, the machine rinses. Water flows out of
the dual spout. The operation stops automatically.
‘Please
select product:’
appears on the display.
To ensure that you get many years of reliable service out of your
GIGA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the dual spout (see Chapter 5 ‘Mainte-
nance – Dismantling and rinsing the dual spout’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
E In the interests of hygiene, we recommend changing the milk
pipe on a regular basis (approx. every 3 months). Replacement
pipes are available from specialised dealers.
Switching on
Daily maintenance
To Next Page
Loading...
Need help?
General
