Jura GIGA X9 Professional User Manual

29
4 Permanent settings in programming mode
T Press the ‘Latte macchiato’ button.
T Press the
‘Amount of milk’ button.
T Press the
‘+’ or ‘–’ button to change setting for the amount
of milk to
‘6sec.’.
T Press the
‘Save’ button.
T Press the
‘Amount of milk foam’ button.
T Press the
‘+’ or ‘–’ button to change setting for the amount
of milk foam to
‘14sec.’.
T Press the
‘Save’ button.
T Press the
‘Volume’ button.
T Press the
‘+’ or ‘–’ button to change setting for the fill vol-
ume to
‘40ml’.
T Press the
‘Save’ button.
 O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Product settings (2/5)’/ ‘Set consistency of
grind’
you can adjust both grinders separately to the degree of roast
of your coffee.
The consistency of grind is correct if the coffee flows regularly from
the dual spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/5)’
 g T Turn the Rotary Switch until the programme item ‘Product
settings (2/5)’
is displayed.
T Press the
‘Set consistency of grind’ button.
‘Set consistency of grind’
T Press the ‘Right grinder’ button.
‘Right grinder’
T Press the ‘+’ or ‘–’ button to change the setting for the con-
sistency of grind.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Set consistency of grind’
Setting the consistency
of grind
Downloaded from ManualsNet.com search engine

Jura GIGA X9 Professional Specifications

General

Brand	Jura
Model	GIGA X9 Professional
Category	Coffee Maker
Language	English