Do you have a question about the Jura IMPRESSA S70 and is the answer not in the manual?
voltage | 230 V AC |
---|---|
power consumption | 1350 W |
fuse | 10 A |
water tank capacity | 2.7 litres |
---|---|
bean container capacity | 280 gr |
grounds container capacity | max. 16 port. |
pump pressure | max. 15 bar |
---|---|
energy consumption standby | approx. 4.4 Wh |
energy consumption ready to make coffee | approx. 31 Wh, Economy Mode on, approx. 41 Wh, Economy Mode off |
weight | 11.7 kg |
---|---|
dimensions | 34.5 x 35 x 39 cm |
cable length | 1.1 m |
water tank capacity | 5.7 litres |
---|---|
grounds container capacity | max. 40 port. |
weight | 15 kg |
---|---|
dimensions | 41 x 47 x 39 cm |
Dangers of electrical machines for children, proper user, faulty machines, immersion.
Avoid rain/snow/frost, wet hands, solid surface, children/pets, unplugging, cleaning, not repairing, cable tripping, dishwasher, ventilation.
Set machine to local water hardness for optimal performance and to prevent furring.
Prepare cup and press coffee key; pre-brew system moistens powder for aroma.
Set desired coffee powder amount for 1 cup, 2 cups adjusted automatically.
Select desired coffee temperature (high or normal) for optimal taste.
Adjust the amount of water for coffee preparation to match cup size.
Set machine to local water hardness for optimal operation and decalcification.
Program a specific time for the machine to automatically switch on.
Set a preferred time for the machine to automatically switch off.
Perform a cleaning cycle after a certain number of uses or rinsing programs.
Machine signals when decalcifying is necessary, especially if not using a filter.
General advice on cleaning the machine's exterior, nozzles, and water tank.
Execute the integrated cleaning program using Jura cleaning tablets.
Run the integrated decalcifying program using Jura decalcifying tablets.
Decalcify the coffee sector using the appropriate program and agent.