Jura IMPRESSA S9 Short Operating Instructions

IMPRESSA S9 / S7 avantgarde
Short operating instructions
Cleaning the cappuccino system
If you use milk products, you should clean the cappuccino system
daily.
 Fill a container with 2.5 dl of water
 Add 1 capful (max. 15 ml) of Auto-Cappuccino Cleaner
 Dip milk suction tube into this mixture
 Position container (approx. 0.5 litre) under the Professional
Cappuccino Frother
 Press the steam key
As soon as the container is empty:
 Fill a container with fresh tap water
 Dip milk suction tube into the container
 Press the steam key
The machine is ready for use as soon as the tap water has run
through
In addition to using the cappuccino cleaning system, you should
also remove the Professional Cappuccino Frother regularly and
rinse it under running water.
 Remove the Professional Cappuccino Frother from the
IMPRESSA S9/S7 avantgarde
 Dismantle the frother
 Rinse all parts of the frother under running water
 Reassemble the frother and reattach to machine
 Please make sure that the aperture of the air supply (= red
circle) is rinsed very carefully and is free of impureness.
Please don’t clean the frother with sharp tools!
Art. 66815 – S9 GB – 10/2006 0046436/1806/1006/7000
Cleaning the Professional Cappuccino Frother

Jura IMPRESSA S9 Specifications

General

Product type	Espresso machine
Capacity in cups	16 cups
Coffee input type	Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	2.7 L
Coffee beans capacity	280 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.34 W
Cord length	1.1 m
Product color	Black
Housing material	-

Weight and Dimensions

Depth	390 mm
Width	345 mm
Height	350 mm
Weight	11900 g