Need help?Do you have a question about the Jura IMPRESSA XF50 and is the answer not in the manual?
General| Product type | Espresso machine |
|---|---|
| Built-in grinder | Yes |
| Capacity in cups | - cups |
| Coffee input type | - |
| Maximum operating pressure | 15 bar |
| Type | Coffee/Espresso |
| Product color | Aluminum |
Details on the intended and correct usage of the IMPRESSA coffee machine.
Important safety warnings regarding electrical hazards, damage, and immersion in water.
Precautions for safe operation, including environmental factors, placement, and cable handling.
Instructions to verify the machine's mains voltage setting matches the rating plate.
Guidance on checking if the correct fuse rating is fitted for the IMPRESSA.
Steps for filling the water tank with fresh, cold water, ensuring correct insertion.
Instructions for filling the bean container with suitable coffee beans, avoiding treated ones.
Guidance on adjusting the grinder setting for different coffee roasts while the grinder is running.
Step-by-step guide for inserting the CLARIS filter cartridge into the water tank.
Instructions on when and how to replace the CLARIS filter cartridge.
Guide to preparing milk foam and warm milk for a cappuccino using the frother.
Instructions for preparing hot milk using the frother's milk function.
Procedure for rinsing the Professional Cappuccino Frother after milk preparation.
Steps for taking apart, rinsing, and reassembling the cappuccino frother.
Daily cleaning routine for the Professional Cappuccino Frother using JURA cleaner.
Setting individual parameters for speciality coffees, milk, and hot water via buttons.
Instructions for setting up or deactivating the CLARIS filter cartridge.
Guide to adjusting the machine's water hardness setting based on water quality.
Setting the energy-saving mode (E.S.M.) for reduced power consumption.
Programming the time interval after which the IMPRESSA will automatically switch off.
Setting whether the rinse cycle should start manually or automatically upon switching on.
Restoring individual or all product settings to factory defaults.
Viewing consumption records and resetting counters for prepared coffees and maintenance.
Locking individual coffees, aroma, water adjustment, or maintenance functions.
Viewing total coffee preparations, maintenance status, and software version.
Changing the unit of measurement for water amount displayed (ML or OZ).
Selecting the user interface language from a list of available options.
Instructions for filling the water tank, with a reminder about using fresh, cold water.
Guidance on emptying the coffee grounds container when indicated by the display.
Troubleshooting steps if the drip tray is not correctly inserted or is missing.
Instructions for refilling the bean container.
Procedure for replacing the CLARIS filter cartridge when prompted.
Information on when and how to perform the general cleaning cycle.
Details on limescale buildup and the need for descaling based on water hardness.
Guidelines for safe and effective cleaning of the machine's exterior and components.
Procedure to empty the system for frost protection during transport.
To Next Page
