Need help?Do you have a question about the Jura IMPRESSA XJ9 Professional and is the answer not in the manual?
General| Product type | Espresso machine |
|---|---|
| Capacity in cups | 40 cups |
| Coffee input type | Coffee beans |
| Coffee maker type | - |
| Appliance placement | Countertop |
| Water tank capacity | 4 L |
| Coffee beans capacity | 500 g |
| Adjustable coffee strength | Yes |
| Maximum operating pressure | 15 bar |
| Cord length | 1.1 m |
| Control type | Buttons |
| Display type | TFT |
| Product color | Silver |
| AC input voltage | 120 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 440 mm |
|---|---|
| Width | 340 mm |
| Height | 500 mm |
| Weight | 13000 g |
Guidelines for the intended and correct usage of the machine.
Crucial safety instructions to prevent electric shock and injury.
Information about the JURA website for product details and support.
Settings exclusively made by authorized JURA service personnel.
Instructions on how to properly place and set up the coffee machine.
Steps for correctly filling the water tank with fresh, cold water.
Instructions on how to fill the bean container with suitable coffee beans.
Initial setup and language selection for first-time operation.
Procedure for activating the CLARIS Pro Blue filter cartridge.
Steps to deactivate the CLARIS Pro Blue filter cartridge.
How to test and determine the water hardness using a test strip.
How to adjust the coffee grinder consistency for optimal coffee.
Instructions for connecting the milk pipe for frothing milk.
Overview of different beverage preparation methods and options.
Steps to prepare a single cup of espresso or coffee.
Instructions for preparing two cups of coffee or speciality drinks.
How to prepare layered milk-coffee drinks like latte macchiato and cappuccino.
Steps to prepare hot milk or milk foam separately.
Instructions for preparing coffee using pre-ground coffee.
How to permanently set the water volume for specific cup sizes.
Instructions for dispensing hot water at different temperature settings.
Procedure for powering on the machine and initial rinse cycle.
Essential daily cleaning tasks to maintain machine performance and hygiene.
Steps to properly switch off the machine, including rinsing.
Configuring maintenance tasks, filter status, water hardness, and rinse cycles.
Customizing settings for individual coffee products and options.
Adjusting energy-saving modes, auto-off timers, units, language, and display.
How to enable or disable access to the machine's programming mode.
Detailed adjustments for temperature, strength, and volume for each product.
Enabling or disabling temporary adjustments during beverage preparation.
Activating or deactivating the product selector interface.
Locking or unlocking individual beverage preparation options.
Adjusting the machine's water hardness setting for optimal descaling.
Activating or deactivating the energy-saving mode to reduce power consumption.
Setting the time after which the machine automatically switches off.
Changing the unit of measurement for dispensed water (ml or oz).
Resetting machine or product settings back to their original factory defaults.
Selecting the preferred language for the machine's display.
Customizing the background colour of the selection screen.
Viewing counters for prepared products and maintenance status.
Performing the rinse cycle for the coffee system manually.
Cleaning the milk system after each milk preparation.
Daily cleaning procedure for the cappuccino frother using special cleaner.
Steps to disassemble, clean, and reassemble the cappuccino frother.
Guide to inserting and activating the CLARIS Pro Blue filter cartridge.
Instructions for replacing the CLARIS Pro Blue filter cartridge.
Procedure for deep cleaning the entire coffee machine with cleaning tablets.
Steps for removing limescale deposits using descaling agent.
Instructions for cleaning the coffee bean container.
Procedure for descaling the water tank separately.
Instructions for emptying the machine's system for safe transport.
Guidance on responsible disposal of the old machine.
Contact details for JURA service and support.
Information on directives, technical changes, feedback, and copyright.
To Next Page
