12
1 Preparing and using for the first time
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS Pro Blue
filter cartridge. If the water hardness is 10°dH or more, we recom-
mend using the filter cartridge. If you do not know the hardness of
your water, you can find this out first (see Chapter 1 ‘Preparing and
using for the first time – Determining the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition:The water tank and bean container have been filled.
T Insert the mains plug into a power socket.
3 T Switch on the IMPRESSA using the power switch on the back
of the machine.
Q T Press the On/Off button to switch the IMPRESSA on.
The display shows the languages you can choose from.
E To display more languages, press the
‘Next’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g.
‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Filter’
E Now decide whether you want to operate your IMPRESSA with
or without a CLARIS Pro Blue filter cartridge.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Press the
‘Active’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’
T Remove and empty the water tank.
First-time use
J
WARNING
Activating the filter
CAUTION
To Next Page
Loading...
Need help?
General
Weight and Dimensions
