Jura IMPRESSA XJ9 Professional User Manual

28
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Product settings (2/6)’
 O T Press the P button to exit programming mode.
‘Please select product:’
One-off settings cannot now be made during preparation.
In the programme item
‘Product settings (2/6)’/ ‘product selector’
you can make the following setting:
U
‘Active’
U
Product selector view is active and can be started by turning
the Rotary Switch g when the IMPRESSA is ready for use.
U
‘Inactive’
U
Product selector view is inactive.
Example:Proceed as follows to disable product selector view.
Precondition:
‘Please select product:’ is displayed.
 O T Press the P button.
‘Maintenance status (1/6)’
 g T Turn the Rotary Switch until the programme item ‘Product
settings (2/6)’
is displayed.
T Press the
‘product selector’ button.
‘product selector’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Product settings (2/6)’
 O T Press the P button to exit programming mode.
‘Please select product:’
Product selector view can now no longer by started by tur-
ning the Rotary Switch.
Enabling and disabling
product selector view

Jura IMPRESSA XJ9 Professional Specifications

General

Product type	Espresso machine
Capacity in cups	40 cups
Coffee input type	Coffee beans
Coffee maker type	-
Appliance placement	Countertop
Water tank capacity	4 L
Coffee beans capacity	500 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Cord length	1.1 m
Control type	Buttons
Display type	TFT
Product color	Silver
AC input voltage	120 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	440 mm
Width	340 mm
Height	500 mm
Weight	13000 g