32
4 Permanent settings in programming mode
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time fol-
lowing the last action on the machine.
You can set the automatic switch-off to 15 minutes, 30 minutes
or 1–15hours.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings (4/6)’
is displayed.
T Press the
‘Switch off after’ button.
‘Switch off after’
T Press the ‘<’ or ‘>’ button to change the setting.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (4/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
You can change the unit for the amount of water from ‘ml’ to ‘oz’.
Example:Proceed as follows to change the unit for the amount of
water from
‘ml’ to ‘oz’.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings (4/6)’
is displayed.
T Press the
‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings (4/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
Automatic switch-off
Unit for amount of water
To Next Page
Loading...
Need help?
General
Weight and Dimensions
