Jura IMPRESSA XJ9 Professional User Manual

25
4 Permanent settings in programming mode
Programme item Sub-item Explanation
‘Information (6/6)’ ‘Product counter’,
‘Maintenance counter’,
‘Day counter’,
‘Version’
T Keep track of all speciality coffees prepared
and view the number of maintenance
programmes performed.
You can set your IMPRESSA such that programming mode is disab-
led. When programming mode is disabled, it cannot be accessed by
pressing the P button.
Example:Proceed as follows to disable programming mode.
Precondition:
‘Please select product:’ is displayed.
T Remove the water tank.
‘Fill water tank’
T Press the Rotary Switch, the P button and the bottom right-
hand button simultaneously for about 2 seconds.
‘The machine is locked.’ is briefly displayed.
‘Fill water tank’
Programming mode is disabled.
To enable programming mode again, remove the water tank. Then
press the Rotary Switch, the P button and the bottom right-hand
button simultaneously for about 2 seconds.
‘The machine is enab-
led.’
is briefly displayed. Programming mode is enabled again.
Enabling and disabling
programming mode

Jura IMPRESSA XJ9 Professional Specifications

General

Product type	Espresso machine
Capacity in cups	40 cups
Coffee input type	Coffee beans
Coffee maker type	-
Appliance placement	Countertop
Water tank capacity	4 L
Coffee beans capacity	500 g
Adjustable coffee strength	Yes
Maximum operating pressure	15 bar
Cord length	1.1 m
Control type	Buttons
Display type	TFT
Product color	Silver
AC input voltage	120 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	440 mm
Width	340 mm
Height	500 mm
Weight	13000 g