jurop HELIX 220 - Page 3

REV
.
08
20-01-2020
INSTALLATION , USE AND MAINTENANCE MANUAL – HELIX 220-300-450-750-1200-1500-2000
3 / 60
Jurop
SpA
Via Crosera n° 50
33082 Azzano Decimo, PN (Italia)
T
EL
.
+39
0
434
636811
F
AX
.
+39
0
434
636812
http://www.jurop.it
e-mail: info@jurop.it
Index
1. General information
pag. 4
1.1 Introduction 4
1.2 Spare part request 4
1.3 Warranty terms and conditions 4
2. Technical data
pag. 5
2.1 Dimensions and arrangements HELIX 6
2.2 Operation in vacuum mode 8
2.3 Operation in pressure mode 15
2.4 Sound level 22
2.5 Usage limitations 24
2.6 Lubrication 24
3. Safety and accident prevention
pag. 25
3.1 General recommendations 25
3.2 Intended use 25
3.3 Conveyed fluids 25
4. Installation
pag. 25
4.1 Compulsory accessory 25
4.2 Checking upon receipt 26
4.3 Storing in the warehouse 26
4.4 Handling and installation 26
4.5 Mounting 26
4.6 Vacuum – pressure line 27
4.7 Air injection cooling system 28
4.8 Overheating alarm 28
4.9 Oil level alarm (optional) 29
4.10 Drive systems 29
5. Start up
pag. 32
5.1 Pump starting-up 32
5.2 Precautions when starting the system 32
6. Maintenance
pag. 33
6.1 Ordinary maintenance 33
6.2 Extraordinary maintenance 34
7. Malfunctions: troubleshooting
pag. 36
8. Scrapping
pag. 36
9. Accessories
pag. 37
9.1 Muffler: models and dimensions 37
9.2 Suction group: models and dimensions 37
9.3 Manifolds group: models and dimensions 41
SPARE PART DATA SHEET – HELIX 220 42
SPARE PART DATA SHEET – HELIX 220 MOLT . 44
SPARE PART DATA SHEET – HELIX 350-450 45
SPARE PART DATA SHEET – HELIX 750-1200 47
SPARE PART DATA SHEET – HELIX 750-1200-1500 HDR 49
SPARE PART DATA SHEET – HELIX 1500 50
SPARE PART DATA SHEET – HELIX 2000 52
SPARE PART DATA SHEET – ACCESSORIES 54