A.7 Internet Access
I cannot access the Internet.
STEPS CORRECTIVE ACTION
1 Make sure ADSL2+ Combo Router is turned on and connected to the
network.
2 If the DSL LEDs are off, refer to Section A.1.3.
3 Verify your WAN settings.
4 Make sure you entered the correct user name and password.
.
Internet connection disconnects.
STEPS CORRECTIVE ACTION
1 Check the schedule rules.
2 If you use PPPoA or PPPoE encapsulation, check the idle time-out
setting.
3 Contact your ISP.
A.8 Remote Node Connection
I cannot connect to a remote node or ISP.
STEPS CORRECTIVE ACTION
1 Check WAN screen to verify that the username and password are
entered properly.
2 Verify your login name and password for the remote node.
3 If these steps fail, you may need to verify your login and password with
your ISP.
To Previous Page