Juvent 1000 - Operating Instructions

Juvent 1000 Instruction Manual 19
1. Step onto the device carfully (Make
sure you are in stocking feet).
(Figure 1)
2. To start your therapy, hold the
treatment card over the indicated
area (on the lower left corner of the
tray) until the green light turns on and
you hear the device start to run. Now
remove your card. (Figure 2)
3.
Operating Instructions
Stand up straight and relax without
bending your knees. (Figure 3)
4.
The Juvent 1000 Platform
performs a four-second self-test to
make sure that everything is
working properly.
5. After the self-test, a 12-second
calibration takes place to
determine your body mass.
Note: During this calibration,
the display screen shows the total
number of treatments that the
device has completed to date .
At the end of the 12 seconds, the
treatment begins.
Figure 1
Figure 2
Figure 3