juwel EccoSkim - Installation in JUWEL aquariums; Fitting in all other aquariums

Installaon in JUWEL aquariums
Fing in all other aquariums
The JUWEL EccoSkim can be fied into all JUWEL Rio, Lido,
Vision, Trigon and Primo 110 aquariums.
Assemble the JUWEL EccoSkim in accordance with the
instrucons.
1.
Hang the JUWEL EccoSkim into the JUWEL filter system's
slits.
2.
Open the water current regulang tube completely.3.
Connect the pump to the electricity mains.4.
The JUWEL EccoSkim may also be used in all other common
types of glass aquarium. To do so, use the supplied sucon
mount to aach the JUWEL EccoSkim to the glass pane.
Assemble the JUWEL EccoSkim in accordance with the
instrucons.
1.
Aach the sucon mount using the slits provided on the
JUWEL EccoSkim housing.
2.
Secure the JUWEL EccoSkim to the glass. Make sure that
half of the top secon of the float protrudes from the
water.
3.
Open the water current regulang tube completely.4.
Connect the pump to the electricity mains.5.
6