JUWEL EccoSkim maintenance
1. Disconnect the power plug of the Eccoflow pump.
2. Remove the JUWEL EccoSkim with the filter mount from the aquarium.
3. Dismantle the JUWEL EccoSkim in the following order:
CAUTION!
Do not pull the pump cable!
This can lead to damage such as cable breakage!
4. Regularly remove deposits from the JUWEL EccoSkim with warm water to keep it
working.
5. Reassemble the components in reverse order.
6. Now reconnect the pump to the power grid.
Hold on to the EccoSkim housing while pushing the filter mount
downwards.
1.
Remove the EccoSkim housing.2.
Remove the pump from the filter mount by carefully pulling and twisng
the pump housing.
3.
To Next Page
Loading...
