54
Button Functions
Turns the TV on or off.
Press the P
OWER button
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)
Power
Number Buttons - 10Key Pad
Tune
Selects the signal input source for the television: INPUT-1, 2, 3 or 4 for video devices like
VCRs, DVD players, or camcorders.
Press the I
NPUT button
Notes:
• When you return to TV mode, press the RETURN +/TV button or direct 10 key pad.
• You can also access the FRONT PANEL CONTROL screen by using the MENU button on
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing MENU
†
on the side panel and choose a mode by using the CHANNEL +/-
buttons (
√
OPERATE
®
).
Input
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the TUNE button
Use these buttons to move up or down all the available channels your TV is able to receive.
Channel +/–
Use these buttons to raise or lower the TV’s volume level.
Volume +/–
LCT1827-001B-A ENG 54 7/25/05, 9:13:36 AM
To Next Page
Loading...
Need help?
General
