EN-4
SUPPLY POWER
1
Connect the charger’s AC power cord to a wall
outlet.
ATTACH BATTERY PACK
2
Align the marks and slide the battery pack in
the direction of the arrow until it locks in
place.
•The CHG. indicator begins blinking to
indicate charging has started.
DETACH BATTERY PACK
3
When the CHG. indicator stops blinking but
stays lit, charging is finished. Slide the battery
pack opposite the direction of the arrow.
CHG. (charge)
indicator
Marks
To AC outlet
REFRESH indicator
REFRESH switch
CHARGING THE BATTERY PACK
To Next Page
Loading...
Need help?
General
