ENGLISH - 5 -
After AUTO PROGRAM is finalized, the PROGRAM menu
appears.
To cancel AUTO PROGRAM, press the STANDARD but-
ton.
You can delete a channel, insert a channel into a programme
number, or re-start AUTO PROGRAM with the PROGRAM
menu. For details, see Program (Programming) menu
on page 10.
4- If you do not have a T-V LINK compatible VCR, press
STANDARD button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, press
button to display T-V LINK
menu. Then follow the operating procedure Downloading
data to VCR in the following T-V LINK section.
If the message PLEASE CHECK ANTENNA CABLE AUTO.
PROGRAMMING SYSTEM does not appear, or if you want
to modify the settings later, you can do manually with the
FEATURE, INSTALL and PROGRAM menus.
T-V LINK
When a T-V LINK compatible VCR is connected to the EXT.2
Terminal on the TV, it is easier to set up the VCR and to view
videos. T-V LINK uses the following features:
To use T-V LINK functions:
A T-V LINK compatible VCR means a JVC video cassette
recorder with the T-V LINK logo, or with one of the following
logos. However, these VCRs may support some or all of the
features described earlier. For details, see your VCR instruc-
tion manual.
Q-LINK (a trademark of Panasonic Corporation)
Data Logic (a trademark of Metz Corporation)
Easy Link (a trademark of Phillips Corporation)
Megalogic (a trademark of Grundig Corporation)
SMARTLINK (a trademark of Sony Corporation)
Downloading data to VCR:
The VCR will automatically download the registered data on
the TV channels from the TV. This means you do not need to
set up the programme channels on your VCR manually.
The T-V LINK menu will be displayed when you press the
button while PROGRAM menu is displayed, or when-
ever the INSTALL menu operations are performed.
Press button to start downloading data to VCR.
If you do not want to do, press the STANDARD button to
exit the menu.
When FEATURE NOT AVAILABLE... is displayed:
If FEATURE NOT AVAILABLE... is displayed, the download
was not performed correctly. Before trying to download again,
check that:
The VCR power is turned on
The VCR is T-V LINK compatible
The VCR is connected to the EXT.2 terminal
The SCART cable is fully wired.
Direct Rec:
What You See Is What You Record
You can easy record to VCR the images that you are watch-
ing on the TV. For details, read the manual for your VCR,
Use your VCR controls. You cannot carryout Direct Rec us-
ing your TVs control.
79
79 9&5
9&5 ,6 5(&2 5',1*
When the VCR is not ready (for example when there is no
tape inserted), NO RECORDING is displayed.
In the following situations, the VCR will stop recording if the
TV is turned off, if the TV channel or input is changed, or if
the menu is displayed on the TV:
When recording images from an external device connected
to the TV. (for example a camcorder)
When recording a TV channel after it has been un-
scrambled on a decoder.
When recording a TV channel by using the TVs output be-
cause the VCRs own tuner cannot properly receive that
channel.
TV auto power on/VCR image view:
When the VCR starts playing, the TV automatically turns on
and the images from EXT.2 (EXT-2) terminal appear on the
screen.
This function does not happen if your TVs main power
is turned off. Set your TVs main power to on (standby
mode).
01-ENG-2835-AK45-C1100UK-4-3-(AV-28KT1&BUF&SUF).p65 28.05.2003, 19:565
To Next Page
Loading...
Need help?
General
