Setting up your TV
7
2 Press the a button
The LANGUAGE menu appears.
3 Press the 6 buttons to choose
ENGLISH
The on-screen display will then be in
English.
To receive SKY 1 you need a satellite
tuner. You must have the satellite tuner
set to SKY 1 before starting the AUTO
PROGRAM function which follows.
4 Press the a button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and received TV channels are
automatically stored in the programme
numbers (PR).
• To cancel the AUTO PROGRAM
function:
Press the b button.
After the TV channels have been
registered in the programme
numbers (PR), the EDIT menu
appears
• If you want to, you can now edit the
programme numbers (PR) using the
EDIT/MANUAL function. For details,
see “EDIT/MANUAL” on page 30.
• If you do not want to edit programme
numbers (PR), go to the next step.
5 Press the a button to display the
T-V LINK menu
6 If you do not have a T-V LINK
compatible VCR connected:
Press the b button to exit the T-V LINK
menu.
The T-V LINK menu disappears.
If you have a T-V LINK compatible
VCR connected to the EXT-2
terminal:
Follow the operating procedure
“Downloading data to a VCR” on page 35
to transmit the programme number (PR)
data.
AV-32&28R25EK Re.fm Page 7 Thursday, March 7, 2002 10:17 PM
To Next Page
Loading...
Need help?
General
