JVC CA-MXJE3 User Manual

3
Connections
• Connect VIDEO OUT directly to the video input of your
TV. Connecting VIDEO OUT to a TV via a VCR may cause
a monitor problem when playing back a copy-protected
disc. You may also have a monitor problem when
connecting the player to an integrated TV/Video system.
Do not connect the AC power cord until all other
connections have been made.
OPTICAL
DIGITAL
OUTPUT
CAUTION:
SPEAKERS IMPEDANCE
6
Ω
–16
Ω
L
R
ª
·
ª
·
VOLTAGE
SELECTOR
SPEAKERS
110V
127V
220V
230V-240V
~
From AM/FM antenna
See page 4.
Ÿ From the digital input of digital audio
component such as CD recorder, etc.
See page 4.
! From the video input of TV/monitor
See page 4.
⁄ From front speakers
See page 5.
¤ From a wall outlet
Plug the AC power cord only after all
connections are complete.
• Before plugging in, confirm the
position the voltage selector points at.
See page 5 and the back cover.
• If the wall outlet does not match the AC
plug, use the supplied AC plug adaptor.
@ Voltage Selector
Before plugging in, confirm the position
the voltage selector points at. See page 5.
MX-JE3.book Page 3 Thursday,January13, 2005 3:32 PM

JVC CA-MXJE3 Specifications

General

Brand	JVC
Model	CA-MXJE3
Category	Speaker System
Language	English