JVC COMPU LINK RX-305TN

Recording
= Recording
1. Press the SOURCE key for the desired source.
2. Operate the corresponding source equipment.
<If you select PHONO>
Turntable and tape deck can be operated.
ry AN
Li!
Notes:
The
surround
sound
is
recorded
as
a
normal
stereo
sound
even
if
it is recorded with the SURROUND key is ON.
= Three-Head Tape Decks
if
you
have
a
three-head
tape
deck,
you
can
use
it
to
monitor
the
sound
being
recorded.
Connect
the
tape
deck
to
the
TAPE
2/VIDEO
SOUND
terminals
and
proceed
as
follows:
1. Start recording the source onto the TAPE 2 deck.
When
the
TAPE
2
MONITOR
indicator
is
off,
you
hear
the
sound
of
the
source
playing
through
the
speakers.
2. Press the TAPE 2/VIDEO SOUND key.
VIDEO SOUND
TAPE2
TAPE 2 MONITOR
Now you hear the sound of the recording immediately as it is made
on the tape.
@ By pressing the TAPE 2/VIDEO SOUND key on and off, you can
compare the sound quality of the source with the quality of the
tape recording being made.
Note:
Set the recording level from the tape deck. It can not be set with
the VOLUME control of this machine.
= Dubbing Tapes
Connect
one
tape
deck
to
the
TAPE
1
terminals,
the
other
tape
deck
to
the
TAPE
2/VIDEO
SOUND
terminals.
<To record from TAPE 1 to TAPE 2/VIDEO SOUND>
1. Press the TAPE 1 key.
= Tuy pee i
oe oe oe ee
2.
Play
back
the
TAPE
1
deck
and
record with
the
TAPE
2/VIDEO
SOUND
deck.
<To
record
from
TAPE
2/VIDEO
SOUND
to
TAPE
1>
1.
Press
the
TAPE
2/VIDEO
SOUND
key
and
a
SOURCE
key
other
than
TAPE
1.
TAPE 2 MONITOR
VIDEO SOUND
TAPE?
belt
2.
Play
back
the
TAPE
2/VIDEO
SOUND
deck
and
record
with
the
TAPE
1
deck.
—12—