To Next PageTo Next PageWhat to do if there is no sound from JVC Receiver speakers?
If there's no sound from your JVC Receiver speakers, try these steps: * Ensure speaker signal cables are correctly connected. * Verify all audio connections are accurate. * Select the correct source input. * Deactivate muting, if enabled. * Choose the appropriate audio input setting (analog or digital).
Why is my JVC RX-D401S Receiver remote control not working?
If the remote control for your JVC Receiver isn't working, check these possible causes: * Ensure there are no obstructions blocking the remote sensor on the receiver. * Replace the batteries, if they are weak. * Make sure the mode selector is in the correct position.
How to make JVC Receiver remote control operate as intended?
If your JVC Receiver remote control doesn't operate as expected, set the mode selector correctly and then press the corresponding source selecting button before operation.
How to fix JVC Receiver if the power does not come on?
If your JVC Receiver isn't powering on, ensure the power cord is securely plugged into an AC outlet.
Why does my JVC Receiver keep turning off?
If your JVC Receiver turns off unexpectedly (enters standby mode), the following could be the reasons: 1. Speakers overloaded due to high volume: Stop the playback source. 2. Short circuit at speaker terminals: Check the speaker wiring. If wiring is not short-circuited, contact your dealer. 3. Receiver overloaded due to high voltage: Consult your dealer after unplugging the power cord.
What to do if HDMI signals do not come on JVC RX-D401S?
If HDMI signals do not come on in your JVC Receiver, consider these solutions: * Ensure the video or audio format is compatible with the receiver and TV. * Connect a HDCP-compatible TV. * Try disconnecting and reconnecting the HDMI cable. * Use a HDMI cable shorter than 5 m (15 ft) for stable operation.
How to fix sound from one speaker only on JVC Receiver?
If you only hear sound from one speaker on your JVC Receiver, check the speaker wiring and reconnect if necessary.
How to eliminate hiss during FM reception on JVC Receiver?
To address continuous hiss or buzzing during FM reception on your JVC Receiver: * Connect an outdoor FM antenna or contact your dealer. * Select another station. * Verify you have the correct antenna with your dealer. * Check the antenna connections.
Why is there occasional cracking noise during FM reception on JVC Receiver?
To resolve occasional cracking noise during FM reception on your JVC Receiver, move the antenna farther from automobile traffic.
General| Channels | 7.1 |
|---|---|
| Audio Formats | Dolby Digital, DTS |
| FM Tuner | Yes |
| Bluetooth | No |
| Frequency Response | 10 Hz - 100 kHz |
| Signal to Noise Ratio | 95 dB |
| Frequency Response (extended) | 10 Hz - 100 kHz |
| Tuning Range | 87.5 - 108 MHz (FM) |
| Input Sensitivity | 200mV |
| Digital inputs | Optical, Coaxial |
| Video Connections | HDMI, Component, Composite |
| Power Output | 100W per channel (6 ohms, 1kHz, THD 0.9%) |
| Speaker load impedance | 6 ohms - 16 ohms |
| Signal-to-Noise Ratio (dB) | 95 dB |
| Speaker Impedance | 6 ohms - 16 ohms |
Describes risks like electric shock, fire, and moisture.
Outlines FCC rules for digital devices.
Highlights key technologies like Hybrid Feedback Digital Amplifier and HDMI.
Covers power sources, ventilation, and general handling.
Identifies and describes each button on the remote.
Identifies front panel buttons, lamps, and terminals.
Explains the meaning of various indicators on the display.
Details all input and output terminals on the rear.
Covers general precautions, location, and handling.
Lists included items and remote battery installation.
Describes connecting the AM loop and FM antennas.
Illustrates speaker placement and provides connection steps.
Details HDMI connectivity and video signal conversion.
Describes composite, S-video, and component connections.
Details connecting DVD players/recorders via analog outputs.
Explains analog connection for DVD-Audio.
Provides tips and restrictions for various connections.
Step-by-step guide for VCR video and audio connections.
Explains digital coaxial and optical connections.
Details connecting a DBS tuner.
Explains how to connect the TV for viewing.
Describes how to connect and use the USB terminal.
Instructions for connecting the AC power cord.
Step-by-step guide for installing PC drivers for USB audio.
How the PC recognizes the receiver and plays audio.
How to power the receiver on and put it into standby.
Using the source selector to choose inputs.
Configuring video input settings for components.
Configuring audio inputs for digital and analog sources.
How to control volume and use headphones.
Setting how digital audio signals are decoded.
Temporarily silencing sound and adjusting display.
Setting the receiver to turn off automatically.
Understanding the indicators on the display.
Automating speaker configuration.
Navigating the receiver's menu system.
Defining speaker sizes and channel configurations.
Setting speaker distance and output based on room size.
Configuring surround back speaker options.
Manually setting speaker sizes.
Measuring and inputting speaker distances.
Registering components connected to digital inputs.
Selecting surround sound modes.
Choosing main, sub, or both channels for Dual Mono.
Configuring subwoofer output for LFE and main signals.
Adjusting crossover for small speakers.
Assigning components to DIGITAL IN terminals.
Adjusting LFE for distorted bass.
Enhancing sound for night listening.
Correcting audio/video sync issues.
Storing volume levels per source.
Assigning sources to HDMI/Component inputs.
Setting the output video signal type.
Overview of adjustable sound parameters.
Fine-tuning volume for each speaker.
Modifying frequency response.
Enhancing bass response.
Reducing input signal levels.
Adjusting sound effects for DSP modes.
Simulating room acoustics.
Controlling the reverberation decay.
Controls for panorama, width, dimension, gain, tone, and alignment.
How to find radio stations manually.
Storing and recalling favorite stations.
Step-by-step process for saving preset stations.
Adjusting FM reception for clarity.
Simulating movie theater acoustics.
Overview of available surround sound processing.
Detailed explanation of Dolby and DTS formats.
Information on Linear PCM and Multi channel PCM.
General description of DSP modes.
Explains HALL, LIVE CLUB, etc. modes.
Using DSP for monaural video and headphone output.
Table showing modes based on input and settings.
Simulating rear surround speakers.
Step-by-step guide to choosing surround modes.
How the receiver automatically selects modes.
How to connect components for system control.
Specific video cable hookups for the system.
Overall steps for setting up the system.
Features for simplified operation.
Using the remote for TVs, VCRs, etc.
Specific remote functions for TV control.
Setting codes for DVD recorders.
Remote functions and codes for VCRs.
How to program the remote for different TV brands.
How to program the remote for different VCR brands.
Programming for CATV converters and DBS tuners.
Programming for DVD players.
Solutions for power-related problems.
Diagnosing and fixing audio/video problems.
Power output, impedance, and distortion details.
Technical details of interface connections.
FM/AM tuning ranges and general unit specs.
Details of the product warranty.
