JVC RX-D411S - User Manual

Questions and Answers:

M
Molly JacksonJul 29, 2025
Why does my JVC RX-D411S display an error message when using a subwoofer?
- W
  Willie HendersonJul 29, 2025
  If you're seeing an error message related to the subwoofer on your JVC Receiver, there are a few potential causes. The built-in volume control of the powered subwoofer might be set too high, so try lowering it. Also, if the front speakers are small, the receiver might not detect the subwoofer. In this case, check the subwoofer connection and ensure it's turned on. If needed, replace the front speakers with larger ones or try setting the volume level of the subwoofer higher.
J
Justin HillAug 3, 2025
How to fix an error message related to speaker size on my JVC Receiver?
- M
  Matthew MorrisonAug 3, 2025
  An error message related to speaker size on your JVC Receiver can occur if the speaker sizes are disproportionate. If the front speakers are smaller than the surround speakers, change the front speakers to larger ones, or change the surround speakers to smaller ones. Similarly, if the surround speakers are smaller than the surround back speakers, change the surround speakers to larger ones, or change the surround back speakers to smaller ones. Also, make sure that the right-and-left front and surround speaker sizes are proportioned, rearrange them if they are not.
J
James PaulAug 8, 2025
What to do if my JVC Receiver shows an error and the sound is not clear?
- J
  Jessica ElliottAug 8, 2025
  If your JVC Receiver displays an error message along with unclear sound, it may be due to background noise. Try restarting the system in a quieter environment. If electronic equipment is nearby, turn off devices like air conditioners. Additionally, ensure the speakers are not too close to the listening position; if they are, move them farther away. Finally, adjust the speaker position and angle.
A
Amy CarrilloAug 13, 2025
Why am I getting an error message related to surround back speakers on my JVC RX-D411S?
- A
  armstrongkristiAug 14, 2025
  An error message related to surround back speakers on your JVC Receiver can occur if the left surround back speaker is not connected or its connection is loose, even if the right surround back speaker is detected. Check the connection of the left surround back speaker. If using a single speaker as the surround back speaker, connect it to the left surround back speaker terminal. Also, ensure that the right-and-left surround back speaker sizes are proportioned, rearrange them if they are not.
A
Adam SmithAug 18, 2025
What causes an error message on my JVC RX-D411S Receiver if the speaker is too far?
- M
  Maurice SantiagoAug 18, 2025
  If you're getting an error message and the speaker is too far from the listening position when using your JVC Receiver, note that the speaker distance is adjustable up to 9 m (30 ft). Ensure the speaker is placed within this adjustable range from the listening position. Adjust the speaker position and angle.
C
Christina PowersAug 23, 2025
Why does my JVC RX-D411S Receiver show a warning message?
- B
  Brandon RamirezAug 25, 2025
  A warning message on your JVC Receiver can appear if the polarity of the speaker connection is wrong. Match the polarity of the speaker terminals.

JVC RX-D411S Specifications

General

Power output	100W per channel (6 ohms, 1 kHz, 0.9% THD)
Frequency response	10Hz-100kHz (+1, -3dB)
Dimensions	435 x 147 x 374mm
Weight	8.3kg
Input sensitivity	200 mV
Digital inputs	coaxial, optical
Video Connections	composite